 | BS 5514-6:1992 Ref: 0 580 21127 4
Reciprocating internal combustion engines. Performance. Specification for overspeed protection
Price: £30.00 |
|
|
| | BS 5514-7:1996 Ref: 0 580 25992 7
Reciprocating internal combustion engines: performance. Codes for engine power
Price: £63.60 |
|
|
| | BS 5587:1978 Ref: 0 580 10094 4
Specification for coated abrasives - flap wheels with incorporated flanges or separate flanges - designation and dimensions
Price: £30.00 |
|
|
| | BS 5594:1993 Ref: 0 580 21633 0
Specification for leaf chains, clevises and sheaves
Price: £78.00 |
|
|
| | BS 5600-1.1:1979 Ref: 0 580 10629 2
Powder metallurgical materials and products. General information. Introduction and contents
Price: £30.00 |
|
|
| | BS 5600-3.3:1987 Ref: 0 580 15976 0
Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
Price: £30.00 |
|
|
| | BS 5044:1973 Ref: 0 580 07938 4
Specification for contrast aid paints used in magnetic particle flaw detection
Price: £30.00 |
|
|
| | BS 5106:1988 Ref: 0 580 16664 3
Specification for dimensions of spiral anti-extrusion back-up rings and their housings
Price: £78.00 |
|
|
| | BS 5138:1974 Ref: 0 580 08138 9
Specification for magnetic particle flaw inspection of finished machined solid forged and drop stamped crankshafts
Price: £108.60 |
|
|
| | BS 5186:1975 Ref: 0 580 08781 6
Specification for shaft centre heights
Price: £40.00 |
|
|
| | BS 5208:1975 Ref: 0 580 08673 9
Specification for dimensions of power take-off driving shafts and mounting faces for small internal combustion engines
Price: £63.60 |
|
|
| | BS 5257:1975 Ref: 0 580 08875 8
Specification for horizontal end-suction centrifugal pumps (16 bar)
Price: £63.60 |
|
|
| | BS 5326:1976 Ref: 0 580 09095 7
Specification. Internal broaching tools and pull chuck locations
Price: £30.00 |
|
|
| | BS 5341-5:1976 Ref: 0 580 09218 6
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Ring grooves
Price: £78.00 |
|
|
| | BS 5341-6.1:1992 Ref: 0 580 20729 3
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications. Vocabulary
Price: £78.00 |
|
|
| | BS 5341-6.2:1992 Ref: 0 580 20730 7
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications. Inspection measuring principles
Price: £108.60 |
|
|
| | BS 5341-6.4:1992 Ref: 0 580 20732 3
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications. General specifications
Price: £78.00 |
|
|
| | BS 5341-6.5:1992 Ref: 0 580 20733 1
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabularly, inspection methods and generic specifications. Quality requirements
Price: £63.60 |
|
|
| | BS 5341-7.1.1:1992 Ref: 0 580 20741 2
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Rectangular compression rings. Specification for rectangular rings
Price: £78.00 |
|
|
| | BS 5341-7.2:1992 Ref: 0 580 20740 4
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Specification for scraper rings
Price: £78.00 |
|
|
| | BS 5341-7.3.1:1992 Ref: 0 580 20742 0
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Keystone and half keystone compression rings. Specification for keystone rings
Price: £78.00 |
|
|
| | BS 5341-7.4:1992 Ref: 0 580 20743 9
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Specification for oil control rings
Price: £108.60 |
|
|
| | BS 5341-8.1:1992 Ref: 0 580 20744 7
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for multi-piece oil control rings. Specification for coil-spring-loaded oil control rings
Price: £141.00 |
|
|
| | BS 5512:1991 Ref: 0 580 19517 1
Method of calculating dynamic load ratings and rating life of rolling bearings
Price: £150.00 |
|
|
| | BS 5514-1:1996 Ref: 0 580 25991 9
Reciprocating internal combustion engines. Performance. Standard reference conditions, declarations of power, fuel and lubricating oil consumptions and test methods
Price: £123.00 |
|
|
| | BS 5514-3:1990 Ref: 0 580 18398 X
Reciprocating internal combustion engines: performance. Specification for test measurements
Price: £40.00 |
|
|
| | BS 5514-4:1997 Ref: 0 580 27816 6
Reciprocating internal combustion engines. Performance. Speed governing
Price: £78.00 |
|
|
| | BS 5600-3.6:1988 Ref: 0 580 16736 4
Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals. Determination of fluid permeability
Price: £78.00 |
|
|
| | BS 5600-3.11.2:1984 Ref: 0 580 13730 9
Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals. Determination of apparent hardness. Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
Price: £30.00 |
|
|
| | BS 5645:1987 Ref: 0 580 16140 4
Specification for static load ratings for rolling bearings
Price: £63.60 |
|
|
| | BS 5671:1979 Ref: 0 580 10561 X
Guide for commissioning, operation and maintenance of hydraulic turbines
Price: £78.00 |
|
|
| | BS 5672:1991 Ref: 0 580 19638 0
Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines
Price: £63.60 |
|
|
| | BS 5686:1986 Ref: 0 580 15291 X
Specification for straight-sided splines for cylindrical shafts: metric nominal dimensions, tolerances and gauging requirements
Price: £78.00 |
|
|
| | BS 5739:1979 Ref: 0 580 10786 8
Method of presentation of lubrication instructions for machine tools
Price: £30.00 |
|
|
| | BS 5751:1987 Ref: 0 580 15950 7
Specification for dimensions of housings for hydraulic seals for reciprocating applications
Price: £40.00 |
|
|
| | BS 5773-7:1980 Ref: 0 580 11607 7
Metric needle roller bearings. Specification for dimensions of track rollers
Price: £30.00 |
|
|
| | BS 5773-8:1983 Ref: 0 580 13144 0
Metric needle roller bearings. Specification for tolerances of track rollers
Price: £30.00 |
|
|
| | BS 5801:1979 Ref: 0 580 11023 0
Specification for flat-top chains and associated chainwheels for conveyors
Price: £40.00 |
|
|
| | BS 5812-1:1979 Ref: 0 580 11041 9
Materials for plain bearings. Specification for aluminium alloy for solid bearings
Price: £30.00 |
|
|
| | BS 5831:1979 Ref: 0 580 11074 5
Specification for designation and multilingual nomenclature for diamond or cubic boron nitride grinding wheels and saws
Price: £78.00 |
|
|
| | BS 5851:1980 Ref: 0 580 11161 X
Specification for grain sizes of diamond or cubic boron nitride
Price: £40.00 |
|
|
| | BS 5860:1980 Ref: 0 580 11126 1
Method for measuring the efficiency of hydraulic turbines, storage pumps and pump-turbines (thermodynamic method)
Price: £108.60 |
|
|
| | BS 5884:1999 Ref: 0 580 33060 5
Magnetic materials. Methods for the determination of the relative magnetic permeability of feebly magnetic materials
Price: £63.60 |
|
|
| | BS 5989-1:1995 Ref: 0 580 24064 9
Rolling bearings: metric thrust bearings. Specification for dimensions of thrust bearings
Price: £78.00 |
|
