GEAR DESIGN AND LOADING WORKSHOP DAY 1
|
|
GEAR DESIGN AND LOADING WORKSHOP DAY 1 |
|
Location: Design Unit, Newcastle University, Newcastle upon Tyne, NE1 7RU
Times: 9.30am - 4.30pm with refreshment breaks
Tutor: Dr Rob Frazer, Design Unit, Newcastle University
Registration: Forms should be returned to BGA by 9 June 2010
Event co-sponsored by the Institution of Mechanical Engineers
Do You Understand Gear Rating? Would you like to know more? Applying the latest analysis methods could save you money and make your company more competitive. This Workshop will give you the opportunity to explore and apply the stress analysis procedures published in ISO 6336, which was revised in 2006 and discuss ideas and implicatins with other members of the industry.
Increasingly, gear users are requesting that their suppliers calculate tooth bending and contact stresses (and hence load capacity) in accordance with the latest ISO 6336 standard. Even when no such request is made, it still makes sense for gear designers to use the most recently published techinques. However, the latest standards are rather daunting for those who are new to them so the purpose of this workshop is to help people to desing better gears by introducting them to these procedures.
TheWorkshop will cover:
The calculation of tooth bending and contact stresses in a given set of cylindrical gears
Please note: The number of delegates will be limited to 10 only so please book early.
If you wish to attend both days, you will receive a discounted price, please refer to price information below.
Registration forms (including lunch, refreshments and course notes) can be downloaded here:
(right click save target as)
Forms should be faxed back toShirley Elliott on 01283 515841 by 9 June 2010. Please clearly mark on the registration form whether you are a BGA Member, IMechE Member, Non-Member or Student.
Fee: this includes lunch, refreshments and course notes.
| Gear Design & Gear Loading Day 1 Wednesday 23 June 2010 | |||
|
FEE |
VAT |
TOTAL |
|
|
BGA MEMBERS |
£215.00 |
£37.63 |
£252.63 |
|
IMECHE MEMBERS |
£245.00 |
£42.88 |
£287.88 |
|
NON-MEMBERS |
£385.00 |
£67.38 |
£452.38 |
Gear Design & Gear Loading Day 1 & Day 2 Wednesday 23 & Thursday 24 June 2010 |
|||
FEE |
VAT |
TOTAL |
|
BGA MEMBERS |
£385.00 |
£67.38 |
£452.38 |
IMECHE MEMBERS |
£440.00 |
£77.00 |
£517.00 |
NON-MEMBERS |
£690.00 |
£120.75 |
£810.75 |
Note: PLEASE COMPLETE A SEPARATE FORM FOR EACH DELEGATE AND PHOTOCOPY AS NECESSARY
Please remit sum as appropriate payable to: BRITISH GEAR ASSOCIATION (one cheque can cover all Applications)
VAT REG NO: 172 5908 48
REMITTANCE MUST BE SENT BY: 9 June 2010 to: British Gear Association, Suite 59, IMEX Business Park, Shobnall Road, BURTON ON TRENT, Staffs, DE14 2AU Tel: 01283 515521 Fax: 01283 515841 Email: admin@bga.org.ukk Web: http://www.bga.org.uk
CANCELLATION: Received in writing by 15 June 2010 - 50% refund, from 16 June 2010 - Nil refund
Please note replacement delegates will be accepted at any time
The BGA do not accept liability for any injuries or losses of any nature incurred by delegates and/or accompanying persons, nor the loss or damage to their luggage and/or personal belongings.