GEAR MEASUREMENT
DAY 2
|
|
GEAR MEASUREMENT DAY 2 |
|
Location: Design Unit, Newcastle University, Newcastle upon Tyne, NE1 7RU
Times: 9.30am - 4.30pm with refreshment breaks
Tutor: Dr Rob Frazer, Design Unit, Newcastle University
Registration: Forms should be returned to BGA by 16 June 2010
Event co-sponsored by the Institution of Mechanical Engineers
The seminar aim is to develop the interpretation skills of gear personnel who are involved with measurement processes. Using gear measuring instruments in a simple pass/fail process fails to maximise the investment made in measuring equipment and the potential to improve the manufacturing process performance.
Two areas are addressed in this seminar; the recognition of the cause of manufacturing errors by the careful interpretation of measurement results, and the control of the measuring process by using appropriate calibration procedures to quantify the measuring instrument uncertainty.
The Seminar covers:
Interpreting measurement results to identify the cause of manufacturing errors. A strategy will be presented and results from typical manufacturing processes presented. Bring your own results along for general discussion. Examples are available to test your skills.
It will be helpful to be familiar with interpreting lead, profile and pitch error charts. You are advised to bring a calculator for some simple sums. There will be plenty of time to discuss your own questions and needs.
Please note: If you wish to attend both Gear Measurement 1 and Gear Measurement 2, you will receive a discounted price, please refer to price information below.
Registration forms (including lunch, refreshments and course notes) can be downloaded here:
(right click save target as)
Forms should be faxed back toShirley Elliott on 01283 515841 by 28 April 2010. Please clearly mark on the registration form whether you are a BGA Member, IMechE Member, Non-Member or Student.
Fee: this includes lunch, refreshments and course notes.
| Gear Measurement Day 2 Wednesday 30 June 2010 | |||
|
FEE |
VAT |
TOTAL |
|
|
BGA MEMBERS |
£190.00 |
£33.25 |
£223.25 |
|
IMECHE MEMBERS |
£220.00 |
£38.50 |
£258.50 |
|
NON-MEMBERS |
£360.00 |
£63.00 |
£423.00 |
|
STUDENTS* |
£40.00 |
£7.00 |
£47.00 |
Gear Measurement Day 1 & Day 2 Tues 29 & Wed 30 June 2010 |
|||
FEE |
VAT |
TOTAL |
|
BGA MEMBERS |
£340.00 |
£59.50 |
£399.50 |
IMECHE MEMBERS |
£395.00 |
£69.13 |
£464.13 |
NON-MEMBERS |
£648.00 |
£113.40 |
£761.40 |
STUDENTS* |
£70.00 |
£12.25 |
£82.25 |
* On production of
a valid student card and applies to full-time students who are under 25 and
attending a University or College on either a full-time or sandwich basis
Note: PLEASE COMPLETE A SEPARATE FORM FOR EACH DELEGATE AND PHOTOCOPY AS NECESSARY
Please remit sum as appropriate payable to: BRITISH GEAR ASSOCIATION (one cheque can cover all Applications)
VAT REG NO: 172 5908 48
REMITTANCE MUST BE SENT BY: 16 June 2010 to: British Gear Association, Suite 59, IMEX Business Park, Shobnall Road, BURTON ON TRENT, Staffs, DE14 2AU Tel: 01283 515521 Fax: 01283 515841 Email: admin@bga.org.ukk Web: http://www.bga.org.uk
CANCELLATION: Received in writing by 23 June 2010 - 50% refund, from 24 June 2010 - Nil refund
Please note replacement delegates will be accepted at any time
The BGA do not accept liability for any injuries or losses of any nature incurred by delegates and/or accompanying persons, nor the loss or damage to their luggage and/or personal belongings.