UNDERSTANDING ENGINEERING STEELS
|
|
UNDERSTANDING ENGINEERING STEELS |
|
Location: Bretby Conference Centre, Ashby Road, Burton on Trent, DE15 0YZ
Times: 10.00am - 4.30pm, with refreshment breaks
Tutor: Mr Graham Haywood, C Eng, FIMMM. Bergsman UK
Registration: Forms should be returned to BGA by 8 September 2010
Event co-sponsored by the Tribology Group and the Aerospace Industries Division of the Institution of Mechanical Engineers
When selecting an engineering steel for a particular application, it is important to be able to understand how and why core strength varies from grade to grade.
Although there are literally thousands of engineering steel specifications, in practice most are either unavailable in small quantities or obsolete. In reality there are actually less than ten different classes of material ranging from ultra high-tensile grades, carbon steels, nitriding steels to surface hardening grades which will meet the requirements of a given application.
Having selected your material, problems encountered en route in producing the final component such as distortion may well be avoided by planning and simple understanding of material behaviour.
The Seminar will cover:
Introduction to steel production
Registration forms (including lunch, refreshments and course notes) can be downloaded here:
(right click save target as)
Forms should be faxed back to Shirley Elliott on 01283 515841 by 8 September 2010. Please clearly mark on the registration form whether you are a BGA Member, IMechE Member, Non-Member or Student.
Fee: this includes lunch, refreshments and course notes.
|
FEE |
VAT |
TOTAL |
|
|
BGA MEMBERS |
£190.00 |
£33.25 |
£223.25 |
|
IMECHE MEMBERS |
£220.00 |
£38.50 |
£258.00 |
|
NON-MEMBERS |
£360.00 |
£63.00 |
£423.00 |
|
STUDENTS* |
£ 40.00 |
£ 7.00 |
£ 47.00 |
* On production of
a valid student card and applies to full-time students who are under 25 and
attending a University or College on either a full-time or sandwich basis
Note: PLEASE COMPLETE A SEPARATE FORM FOR EACH DELEGATE AND PHOTOCOPY AS NECESSARY
Please remit sum as appropriate payable to: BRITISH GEAR ASSOCIATION (one cheque can cover all Applications)
VAT REG NO: 172 5908 48
REMITTANCE MUST BE SENT BY: 8 September 2010 to: British Gear Association, Suite 59, IMEX Business Park, Shobnall Road, BURTON ON TRENT, Staffs, DE14 2AU Tel: 01283 515521 Fax: 01283 515841 Email: admin@bga.org.ukk Web: http://www.bga.org.uk
CANCELLATION: Received in writing by 15 September 2010- 50% refund, from 16 September 2010- Nil refund
Please note replacement delegates will be accepted at any time
The BGA do not accept liability for any injuries or losses of any nature incurred by delegates and/or accompanying persons, nor the loss or damage to their luggage and/or personal belongings.