|
|
GEAR WEAR AND FAILURE RECOGNITION |
|

Location: Design Unit, Newcastle University, Newcastle upon Tyne, NE1 7RU
Times: 09.30am - 4.30pm, with refreshment breaks
Tutors: Dr Brian Shaw & Dr Rob Frazer, Design Unit, Uni versity of Newcastle upon Tyne
Registration: Forms should be returned to BGA by 2 March 2010
Event co-sponsored by the Institution of Mechanical Engineers
The seminar aims to give delegates an insight into the appearance and underlying causes of the various types of gear failure.
The day starts with an introduction to the basics of gear meshing and the concepts behind the calculations which try to guard against failure at the design stage. This leads to a discussion of the mechanics of failures - illustrated by slides showing both the “naked eye” view and, when appropriate, the view under the microscope.
Delegates are then invited to try their hand at identifying the key features of some samples taken from real failures. Please note that as this seminar is being held at the Design Unit, delegates will have the opportunity to see the full range of analytical equipment available for failure investigation work.
The Seminar will cover:
Registration forms (including lunch, refreshments and course notes) can be downloaded here:
(right click save target as)
Forms should be faxed back to Jayne Preston on 01283 515841 by 17 February 2010. Please clearly mark on the registration form whether you are a BGA Member, IMechE Member, Non-Member or Student.
Fee: this includes lunch, refreshments and course notes.
|
FEE |
VAT |
TOTAL |
|
|
BGA MEMBERS |
£190.00 |
£33.25 |
£223.25 |
|
IMECHE MEMBERS |
£220.00 |
£38.50 |
£258.50 |
|
NON-MEMBERS |
£360.00 |
£63.00 |
£423.00 |
|
STUDENTS* |
£ 40.00 |
£ 7.00 |
£ 47.00 |
* On production of
a valid student card and applies to full-time students who are under 25 and
attending a University or College on either a full-time or sandwich basis
Note: PLEASE COMPLETE A SEPARATE FORM FOR EACH DELEGATE AND PHOTOCOPY AS NECESSARY
Please remit sum as appropriate payable to: BRITISH GEAR ASSOCIATION (one cheque can cover all Applications)
VAT REG NO: 172 5908 48
REMITTANCE MUST BE SENT BY: 2 March 2010 to: British Gear Association, Suite 59, IMEX Business Park, Shobnall Road, BURTON ON TRENT, Staffs, DE14 2AU Tel: 01283 515521 Fax: 01283 515841 Email: admin@bga.org.ukk Web: http://www.bga.org.uk
CANCELLATION: Received in writing by 8 March 2010 - 50% refund, from 9 March 2010 - Nil refund
Please note replacement delegates will be accepted at any time
The BGA do not accept liability for any injuries or losses of any nature incurred by delegates and/or accompanying persons, nor the loss or damage to their luggage and/or personal belongings.