British Gear Association - Publications

<BODY BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#0000FF" VLINK="#FF0000" ALINK="#00FFFF"> <A NAME="top"></A> <A HREF="../index.htm" TARGET=data>home page</A> <H1>PUBLICATIONS</H1> <UL> <LI><A HREF="data.htm#code">Codes of Practice</A> <LI><A HREF="data.htm#language">European Language Glossaries for Power Transmission</A> <LI><A HREF="data.htm#manual" TARGET="_self">Gear Technology Manual</A> <LI><A HREF="data.htm#pack" TARGET="_self">Gear Technology Teaching Pack</A> <LI><A HREF="data.htm#report" TARGET="_self">Market Reports</A> <LI><A HREF="data.htm#paper" TARGET="_self">Research Papers</A> <LI><A HREF="../forms/data.htm#order" TARGET="_self">Order Form</A> </UL> <A NAME="code"></A> <H2>Codes of Practice</H2> The Codes of Practice cover the specification and measurement of gears and are designed to improve day-to-day working practices. They embody the best features of well established practical procedures and encourage the adoption of better working practices. <P> The Codes should also help to standardise the terminology used, methods of presentation of gear data and measurement results and should reduce misunderstandings between customer and supplier - leading to the production of better gears. <P> The Codes of Practice were produced by the Design Unit, University of Newcastle upon Tyne {95} in collaboration with the organisations named below. The initial work was sponsored by the DTI as part of a research project entitled 'Improving the Accuracy of Gear Measurement in Industry'. <P> <LI><A HREF="../members/default.asp?Company=24" TARGET="_self">David Brown Group Plc.</A> <LI>Frenco International Ltd. <LI><A HREF="../members/default.asp?Company=31" TARGET="_self">Gear Technology Ltd.</A> <LI>Hahn and Kolb (GB) Ltd. <LI><A HREF="../members/default.asp?Company=71" TARGET="_self">Precision Technologies International Ltd.</A> <LI>P Smith (Consultant) <LI><A HREF="../members/default.asp?Company=83" TARGET="_self">Spline Gauges Ltd.</A> <LI>Tay Tool Works Ltd. <P> Codes of Practice: List and Order Form <P> <A NAME="language"></A> <H2>European Language Glossaries for Power Transmissions</H2> Can you afford to be approaching the Single Market without the necessary language book? The Eight European language glossaries are set out in 4 volumes. <P> European Language Glossaries: List and Order Form <A NAME="manual"></A> <H2>Gear Technology Manual</H2> Based on the highly successful 3 volume Teaching Pack, the Gear Technology Manual has been sponsored by the British Gear Association to provide a wider understanding of gearing and to help compensate for a lack of modern English-Language books on gearing design. <P> The six modules comprise a total of more than 350 pages of text, notes and diagrams and cover: <LI>Drive Systems <LI>Gear System Design <LI>Gear Geometry <LI>Design and Stress Analysis of Spur and Helical Gears <LI>Gearbox Design <LI>Manufacture and Metrology of Spur and Helical Gears <P> Three UK gearing design experts, with experience both of industrial consultancy and teaching, have each compiled two of the modules that make up the Manual. They are: <LI><A HREF="../members/default.asp?Company=95">Mr Dieter Hofmann - Gear Design Unit University of Newcastle</A> <LI><A HREF="../members/default.asp?Company=96">Dr Hellmuth Kohler of Sheffield University</A> <LI><A HREF="../members/default.asp?Company=94">Prof. Bob Munro at Huddersfield University</A> <P> Price: £150 <P> Gear Technology Manuals: Order Form <A NAME="pack"></A> <H2>Teaching Pack on Gear Technology</H2> The Teaching Pack was sponsored by the BGA with the aim of increasing understanding of gearing and compensating for the lack of up-to-date text-books on gearing design. <P> The six modules comprise: <LI>Over 350 pages <LI>Over 200 diagrams suitable for reproduction as overhead projection slides <LI>Thirty 35mm slides <LI>A PC disk and guidance on teaching <P> Subjects covered include: <LI>Drive Systems <LI>Gear System Design <LI>Gear Geometry, Design <LI>Stress Analysis of Spur and Helical gears <LI>Gearbox Design <LI>Manufacture and Metrology of Spur and Helical gears <P> The Guide was written by three UK gearing design experts, with experience both of industrial consultancy and teaching who have each compiled two of the modules that make up the Pack: <LI><A HREF="../members/default.asp?Company=95">Mr Dieter Hofmann - Design Unit at the University of Newcastle</A> <LI><A HREF="../members/default.asp?Company=96">Dr Hellmuth Kohler - Sheffield University</A> <LI><A HREF="../members/default.asp?Company=94">Prof. Bob Munro - Huddersfield University</A> <P> Price £200.00 <P> Teaching Pack on Gear Technology - Order Form <A NAME="report"></A><H2>Market Reports</H2> 'Current market outlook' report - more information <P> Current market outlook' - Order Form <A NAME="paper"></A><H2>Research Papers</H2> Research papers - more information <P> Research papers - Order Form </BODY>